Top Coin Profitability Chart
Bitmain Antminer S9 Hydro (18 Th) is a unique miner as it has one of the highest power consumption, 1728W. The miner uses SHA-256 algorithm and has a hash rate of 18 Th. Miners can get 42 coins with this miner, which is fully ASIC supported. You can monitor this miner no matter where you are. Hathor Network and NLPool are the most profitable coins to mine with this unit. It was released in August 2018 and remained to be a leader in Crypto mining.
About Bitmain Antminer S9 Hydro (18 Th)
The manufacturer doesn’t disappoint as the miner has proven to be effective over the years. The S9 Hydro 18 Th weighs 5150g and comes at 125*190*360mm. Most are wondering why the name ‘Hydro’ on the miner. Users can use water cooling to ensure that the miner cools off. Mineable coins include Acoin, Bitcoin, BitcoinCash, Joulecoin, and others. The usual mining pools associated with Bitmain products include Poolin and SlushPool. It uses the Ethernet interface.
Miners can buy this unit directly from the manufacturer or trusted shops.
Algorithm of the S9 Hydro
The S9 Hydro Antminer uses the algorithm synonymous with Bitmain products. SHA-256 is the algorithm you will find, and that’s why users mine more coins. The Cryptographic is essential in mining all SHA-256 coins. We believe the miner uses the same chip as other miners under the S9 category.
Efficiency of the 18 Th S9 Hydro Antminer
It comes out as a highly effective miner with an efficiency of 0.096j/Gh. With this efficiency, miners can now get performance and results under one roof. The power consumption is a bit too high as it’s at 1728W. Other miners under the S9 series come way below this power consumption. Miners should know that the unit can use water for cooling, which is a huge plus.
Hash rate of the Bitmain Antminer S9 Hydro 18 Th
18 Th is the hash rate that comes with this miner, which is higher than any other S9 series. The voltage used to mine with this miner is a minimum of 11.6V and a maximum of 13V.
Humidity and Temperature
For an effective miner, the humidity and temperature must be in the confines of reality. The minimum set humidity is 5 percent with a 95 percent maximum. As far as temperature goes, the maximum temperature is 5 degrees centigrade, and the maximum is 40 degrees centigrade.
Noise and sound levels with the Hydro 18 Th miner
The miner has the lowest sound levels in the industry. It comes with 45 decibels of noise, which is ideal for Crypto mining. You can mine with this unit at home or in an industrial complex.
The Profitability of the Bitmain Antminer S9 Hydro 18 Th
A day’s worth of mining with this miner will rake in a profit of $3.49. You should know that the electricity cost is not added. The electricity cost is usually a huge problem as it all depends on the rates in your area. A year’s worth of mining with this unit brings in a profit of $1,087.
Warranty of the S9 Hydro 18 Th
The warranty stands at 180 days from the manufacturer. Other shops will give a 90-day warranty or less. All warranty only covers the original purchaser.
Disclaimer: The Above Profit Table is a carefully calculated estimate based on known real-time factors and Parameters. The actual values may or may not vary significantly from the values provided in the table above. The Above table is only meant to provide insights and afford Ideas to any cryptocurrency miner looking to purchase this particular Product for Mining Purposes.
Bitmain Antminer S9 Hydro (18Th) Specs & Features
|Model||Antminer S9 Hydro (18Th)|
|Size||125 x 190 x 360mm|
|Voltage||11.6 - 13V|
|Temperature||5 - 40 °C|
|Humidity||5 - 95 %|
Coins you can mine with Bitmain Antminer S9 Hydro (18Th)
Shops and Vendors