The Antminer S7 has proven to be one of the best since its
release in 2015.it consumes a high amount of power and has dominated the market
because of its strong performance and efficiency. The S7 is also the go-to
choice by miners, because of its reasonable price and strong performance.
The S7 has dual fans that keep it cool as it is being
powered by the 28nm BM1385 ASIC chip. These chips are 135 in number and are
spread across 3 boards. The metal casting allows for a good arrangement of
multiple layers of miners. The Antminer S7 mines bitcoin at 4.73TH/s
The Antminer S7 consumes a minimum power of 1293watts, at a
room temperature of 25degree Celsius. An increase in the room temperature will
result in an increase in the energy needed by the fan to cool the device. This
power consumption is efficient in converting the energy to bitcoin. The S7
consumes about 0.2J/GH.
Bitmain’s high quality 1600 watt APW3 power supply unit is
the recommended power supply needed for the Antminer S7. It is recommended and
efficient because it loses just 7% of electricity between the outlet and miner.
A minimum of 205 volts is required for the APW3 to function.
The APW3 is also a great choice because of its ability to
upgrade in the future and be able to suit other versions of the Antminer. A
good example is the power-hungry Antminer S9.
Assuming that Bitcoins price does not fall, the difficulty
doesn't jump, and the temperature is about 15deg Celsius, it may be possible to
profit from the S7.
Profitability is low for miners without access to low-cost
power, but if Bitcoin’s exchange rate increases, the profitability of the S7
will also be well extended beyond prediction.
It is cost-effective and priced at $2000 initially after
release, but currently priced between $440 - $545 and shipping. The S7-LN is
priced at $291 from Bitmain on Amazon; it is priced at $439 for the new ones
and $409 for the used ones.
To set up the Antminer S7, you’ll need an IP Address, your
mining pool credentials, and using the MinerLink GUI process to set it up. The
Units will automatically begin to hash upon powering up. This can be very
useful in the case of power failure. Ethernet is used to connect the S7.
The S7 is advised to be kept in dry places at room temperature of 40degree celsius-77degree Celsius. The S7-LN is slightly efficient to a home miner, who cannot tolerate a lot of fan noise and or cable clutter.
The S7 is mostly a great option for miners because of its
low-cost power and high-efficiency performance.
Depending on the trading cost of Bitcoin and Bitcoin cash (which is the most profitable
mineable digital currency on the Antminer S7), the Antminer S7 profitability
falls within the range of $3-15er day. It mines BTC or BCH on all the 3 boards,
one at a time.
Period | /Day | /Month | /Year |
---|---|---|---|
Income | $0.32 | $9.60 | $116.80 |
Electricity | - $3.10 | - $93.10 | - $1,132.67 |
Profit | $-2.78 | $-83.50 | $-1,015.87 |
Algorythm | Hashrate | Consumption | Efficiency | Profitability |
---|---|---|---|---|
SHA-256 | 4.73Th/s±5% | 1293W±10% | 0.273j/Gh |
Disclaimer: The Above Profit Table is a carefully calculated estimate based on known real-time factors and Parameters. The actual values may or may not vary significantly from the values provided in the table above. The Above table is only meant to provide insights and afford Ideas to any cryptocurrency miner looking to purchase this particular Product for Mining Purposes.
Manufacturer | 0.273j/Gh |
Model | Antminer S7 |
Release | September 2015 |
Top Coin | bitcoincash |
Size | 123 x 155 x 301mm |
Weight | 3900g |
Noise level | 62db |
Fan(s) | 2 |
Power | 1293W |
Voltage | 12V |
Interface | Ethernet |
Temperature | 0 - 40 °C |
Humidity | 5 - 95 % |
Store | Store Name | Price | Delivery | Additionnals | ROI |
---|
Mining Techn Group OU
Mining Techn Group OU is the sole owner of miningwatchdog.com
Mining Techn Group OU Registration number 16235478
Email: [email protected]
© 2019 - 2024 Miningwatchdog.com. Mining Techn Group Ou