Top Coin Profitability Chart
The Antminer L3++ is an ASIC miner produced by Bitmain, a giant in the crypto miner production industry. It is an addition to Bitmain's Antminer Application Specific Integrated Circuit brand, which has proved itself a force reckoned within the blockchain industry. Launched in 2013, the Antminer brand has always shown the promise of leading technological specifications and excellence in mining quality products. Antminers, with their superior performance and excellent efficiency, lead the mining industry, giving Bitmain a 75% share worldwide.
About Antminer L3++
Bitmain released the Antminer L3 series at the end of 2016, which comes with the self-developed Litecoin chip BM1485. BM1485, the first Litecoin Application Specific Integrated Circuit, is a useful chip for Litecoin miners. Each Litecoin miner comes with 288 such chips to deliver more hash rates and efficiency. Antminer L3 series include three models: Antminer L3 (250Mh/s and power consumption 400W), Antminer L3+ (500Mh/s and 800W), Antminer L3++ (580Mh/s and 942W). Litecoin miners are also known as Scryptminers. Apart from Litecoin mining, the miner is suitable for any cryptocurrency based on Scrypt.
The Antminer L3++ comes with a dual-fan design in the rear and front sides with a compact alloy shell. It weighs 4.4kg and size dimensions of 188 x 130 x 352mm, which gives it a small shape and allows for easy stacking. On the front, there is the IP button, network cable socket, reset button, QC label, etc.
The Antminer L3++ has four hash boards with two PCI-E 6PIN interfaces and four cables connected to the controller. The data cables have a buckle design that ensures tight contact for stable data transfer. It comes with Bitmain's 10nm Application Specific Integrated Circuit (ASIC) chip, which increases efficiency and productivity.
The Antminer L3++ comes with an APW3-12-1600-B2 power supply unit, which has a conversion rate of 93%. The indoor temperature is about 26℃ and about 20℃ at night.
The Antminer L3++ has a low power consumption rate. It is evident that Bitmain also has people looking to mine at home in mind. As seen in the power consumption of the Antminer L3, L3+, L3++, which consume the power of 800W,850W, and 942W, respectively. For users with free electricity, low power consumption is an added advantage as it reduces electricity costs and brings up profitability. Calculating the electricity cost at 0.1 per KWh, users can still see a reasonable profit at the end of the day.
Fan and Air Circulation
The Antminer L3++ has a 12cm fan of 12V 2.3A at the front side for air intake. The miner also has another 12cm fan at the end for taking out the air and heat. These two fans do an excellent job maintaining a stable mining condition by cooling the device and preventing overheating. During normal mining operations, the fan speed is at 4300 rotations per minute, which is quite useful.
Every miner's algorithm is essential as it determines the top coin and scale of profitability for the device. For the Antminer L3++, it works with the Scrypt algorithm. Scrypt is an encryption method that requires lots of time for selection and uses significant memory volumes. It is used in many altcoins as Proof of Work (PoW). Released in 2011, it was first made for Tenebrix and served as the basis for Litecoin and Dogecoin and the Scrypt algorithm.
The Scrypt algorithm is for crypto-coin mining, which makes it more complicated for specialized ASIC miners. Coins mined from Scrypt are different from Bitcoin as Bitcoin uses the SHA-256 algorithm. Scrypt's top coin is Litecoin, but it features about 348 coins on its algorithm.
Most miners' noise level is about 60db to 70db, but the Antminer L3++ has a noise level of 76db. This noise level is because of the fans working to reduce or prevent overheating. During the day, the fan speed is about 4300rpm, and during the night, the fan speed drops to around 3900rpm. The standard fan setting is adjusted automatically based on the ambient temperature. The Antminer L3++ is suitable for mining at home as the noise level is optimized but is best kept at mining farms.
The profitability of the Antminer L3++ depends on the electricity rates of the area and the market conditions. Profitability may vary daily, depending on electricity costs; the device will profit when the market favors the top coin.
Disclaimer: The Above Profit Table is a carefully calculated estimate based on known real-time factors and Parameters. The actual values may or may not vary significantly from the values provided in the table above. The Above table is only meant to provide insights and afford Ideas to any cryptocurrency miner looking to purchase this particular Product for Mining Purposes.
Bitmain Antminer L3++ (580Mh/s) Specs & Features
|Size||188 x 130 x 352mm|
|Temperature||0 - 40 °C|
|Humidity||5 - 95 %|
Coins you can mine with Bitmain Antminer L3++ (580Mh/s)
|Huobi Pool Multi purpose Mining Pool | Reviews & Features||FPPS 1%|
|Poolin First-class Mining Pool | Reviews & Features||FPPS 2.5%|
|OKEx Pool All-in-one Mining Pool | Reviews & Features||FPPS 4% PPS+2% PPS 2%|
|ViaBTC Professional Mining Pool | Reviews & Features||PPS+ 4% PPLNS 2%|
|Minergate Smart Mining Pool | Reviews & Features||PPS 1.5% PPLNS 1%|
|Hashcity multi-currency Mining Pool | Reviews & Features||PPS 1%|
|F2POOL Mining Pool | Reviews & Features||4% PPS|
|PROHASHING Mining pool | Reviews & Features||2.65% PPS,PPLNS|
|HASHLOFT Mining Pool | Reviews & Features||1.47% PPS|
|ANTPOOL Mining Pool | Reviews & Features||1.76% PPS,PPLNS,SOLO|
|LITECOINPOOL.ORG | Reviews & Features||0% PPS|
|MINING POOL HUB | Reviews & Features||0.9% PPLNS|
|MULTIPOOL Mining Pool | Reviews & Features||1.455% PPLNS,PROP|
|SUPRNOVA Mining Pool | Reviews & Features||0.92% PPLNS,PROP|