FusionSilicon X6 Miner

Electricity cost: /KWh
FusionSilicon X6 Miner Image

Top Coin Profitability Chart


Description

FusionSilicon X6 Miner is a Litecoin Miner using the Scrypt algorithm. The miner comes with a maximum hash rate of 860 Mh/s. It also has a maximum power consumption of 1079W. The miner was released in August 2018 with a possibility to mine 23 coins. 


It’s completely ASIC supported, which is a plus for users. This means you can monitor the performance of this unit while away. Litecoin, DigiByte, and Dogecoin are the topmost profitable coins to mine with this unit.


Review and Specs of the FusionSilicon X6 Miner


The miner same looks and design as the other miners on the FusionSilicon shelf. The manufacturer goes ahead and gives users a profitable mining experience. It’s the first miner from the company to mine with the Scrypt algorithm. 


It comes in a size of 130*198*340mm and weighs 4.3 Kg. At the top of the miner, there are naked wires, which are visibly seen. It seems the manufacturer was quick to mass-produce this unit.


Some of the notable coins to mention include Auroracoin, Emerald, GameCredits, Gulden, and Verge. For those who want to buy the unit, you can get it directly from the manufacturer. Others might decide to join reputable mining pools to increase their chances of winning. 


The best mining pools to join include AntPool, F2Pool, Litecoinpool, and more. 


Algorithm of the X6 FusionSilicon Miner


With the Scrypt algorithm, miners get a hashing algorithm that specifically uses high-speed RAM. The algorithm handles transactions in bulks, making solving blocks easier and faster.  Miners will be glad to know that the Scrypt algorithm is widely accepted by merchants worldwide. 


The Algorythm uses less energy, unlike Bitcoin miners. We notice that the manufacturer fails to give the specs of the chip used.


Efficiency of the X6 Miner 


1.255j/Kh is the efficiency you get with this miner. With the miner only mining a handful of coins, you expect the efficiency to be low. Miners love this unit as the efficiency is high enough, unlike other Scrypt algorithm miners. 


It helps lower the cost of electricity as the maximum power consumption stands at 1079W. The low power consumption makes the miner a good option for large scale Litecoin mining.


Hash Rate of the FusionSilicon X6 Miner


With a hash rate of 860 Mh/s, miners are bound to get a profitable mining experience. It’s a high hash rate that is enabling the miner to perform and mine 23 coins. Miners will use the hash rate to mint new coins within minutes. 


A fast hash rate ensures miners get the protection they need from the 51 percent attack. You also get to solve block puzzles faster than most units do under the Scrypt algorithm.


Humidity and Temperature Degrees


For the miner to work efficiently for longer, certain conditions must be met. Miners would want to prolong the lifespan of this unit as much as possible. To do this, you need to follow the set humidity and temperature parameters.


Humidity is set at 95 percent maximum with a 5 percent minimum. The room temperature should be 45 degrees centigrade maximum and 0 degrees centigrade minimum. Two fans help with cooling.


The Profitability of FusionSilicon X6 Miner


Today’s market conditions show a profit ratio of -37 percent and an annual return percentage of -24 percent. The miner will be profitable when the market favors the mining of Litecoin. Miners should adjust their mining experience and learn about Litecoin market conditions. 


It would help if you also used the miner where the electricity rates are low. It will help in lowering the cost of electricity, thus increasing profitability.


Warranty of the X6 Miner 


The manufacturer is only issuing a 90-day warranty for this unit. 

All those interested in the above miner should note that we won't be held liable for any losses incurred while mining with it. Kindly note that Crypto Mining is a risky investment. 


Profitability


Period /Day /Month /Year
Income $3.36 $100.80 $1,226.40
Electricity - $2.59 - $77.69 - $945.20
Profit $0.77 $23.11 $281.20

Algorithms


Algorythm Hashrate Consumption Efficiency Profitability
Scrypt 860Mh/s±5% 1079W±10% 1.255j/Mh $0.77/day

Disclaimer: The Above Profit Table is a carefully calculated estimate based on known real-time factors and Parameters. The actual values may or may not vary significantly from the values provided in the table above. The Above table is only meant to provide insights and afford Ideas to any cryptocurrency miner looking to purchase this particular Product for Mining Purposes.

FusionSilicon X6 Miner Specs & Features


Manufacturer FusionSilicon
Model X6 Miner
Release August 2018
Top Coin dogecoin
Size 130 x 198 x 340mm
Weight 4300g
Noise level 72db
Fan(s) 2
Power 1079W
Voltage 12-13V
Interface Ethernet
Temperature 5 - 45 °C
Humidity 5 - 95 %

Shops and Vendors

Store Store Name Price Delivery Additionnals ROI

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"