Innosilicon A6+ LTC Master

Electricity cost: /KWh
Innosilicon A6+ LTC Master Image

Top Coin Profitability Chart


Description

Innosilicon A6+ LTC Master Review


The Innosilicon A6+ LTC Master is a miner that is produced by the Innosilicon company and mines using the Scrypt algorithm. The Miner mines Nicecoin as its top coin amongst other coins. It has a maximum hash rate of 2.2Gh/s and a power consumption of about 2100W. This product was released in March 2019, and it comes with a dimension of 360 x 155 x 247mm. 

It has a high noise level of 82db, which is considered a high noise level compared to its counterpart in the market. The Innosilicon produced this device for miners looking to mine coins apart from Bitcoin. This device also comes with four fans that act as cooling devices for the Innosilicon A6+ LTC Master. The Innosilicon A6+ LTC Master shows that the product is profitable even though it has a high noise level.

The efficiency despite the product's noise level is 0.955Theoproduct's efficiency product shows that the product is efficient and can reduce the amount of loss that can be gotten in the mining device. The mining device shows that the device is despite the increasing sound and noise levels. The device weighs 9310g and also has a voltage of 12v. It functions at an optimal level within the range of 5-45degrees Celsius and performs efficiently within the humidity range of 5-95%.

Noise level of Innosilicon A6+ LTC Master


The Innosilicon A6+ LTC Master has one of the highest noise levels in the market. It has a noise level of 82db. This does not affect the device's efficiency or the level at which the device work, or even contribute to any loss faced by the device. This shows that the device cannot be set up in a residential area. The Innosilicon A6+ LTC Master was designed to be efficient in operations, but it wasn’t built to lower noise. For new miners, it is not advisable to set up this device in a residential area.

Power Consumption of Innosilicon A6+ LTC Master


The Power consumption of the Innosilicon A6+ LTC Master shows that the device comes with low power consumption. The low power consumption shows that the device does not require a high power supply, and as such, it is very convenient for the miners. The miners spend money in purchasing electricity that the device would use in its operations. The electric cost contributes to the power cost that the device would need to be able to function properly. 

The electric cost is different from location to location, and this cost can affect the miners' profitability. For a device such as this, the power consumption means that the device would need a low power device to be able to function and as such the power supply needed will be less. This would reduce the miner's lower and then not affect the device profitability for the miner.

Hashrate of Innosilicon A6+ LTC Master.


The hash rate of the Innosilicon A6+ LTC Master is 2.2Gh/s. This hash rate comes with the fact that the device can perform efficiently without any losses. The efficiency of the device is 0.955j/mh. This indicates that the device performs optimally and efficiently. This also means that the device efficiency is not affected by the fact hash rate. It was designed to come with such efficiency and less hash rate to avoid any loss that may arise when the device is in its operation. 

The Profitability of Innosilicon A6+ LTC Master

It's one of the most profitable Litecoin miners with a profit ratio of 135804 percent. 

Kindly share your experience with the above miner by dropping a comment. Your suggestions are highly appreciated. 

NA


Profitability


Period /Day /Month /Year
Income $8.00 $240.00 $2,920.00
Electricity - $5.04 - $151.20 - $1,839.60
Profit $2.96 $88.80 $1,080.40

Algorithms


Algorythm Hashrate Consumption Efficiency Profitability
Scrypt 2.2Gh/s±5% 2100W±10% 0.955j/Mh $2.96/day

Disclaimer: The Above Profit Table is a carefully calculated estimate based on known real-time factors and Parameters. The actual values may or may not vary significantly from the values provided in the table above. The Above table is only meant to provide insights and afford Ideas to any cryptocurrency miner looking to purchase this particular Product for Mining Purposes.

Innosilicon A6+ LTC Master Specs & Features


Manufacturer Innosilicon
Model A6+ LTCMaster
Release March 2019
Top Coin dogecoin
Size 360 x 155 x 247mm
Weight 9310g
Noise level 82db
Fan(s) 4
Power 2100W
Voltage 12V
Interface Ethernet
Temperature 5 - 45 °C
Humidity 5 - 95 %

Shops and Vendors

Store Store Name Price Delivery Additionnals ROI
Blokforge Image Blokforge $2,549.00 USD / 0.03971 ? Out of Stock N/A Never Shop

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"

maxi 2 months ago "1"