PandaMiner B3 Pro(8GB)
PandaMiner B3 Pro (8GB) is another one from the Ethereum special mining firm, PandaMiner. It comes with a maximum power consumption of 1250W. What is unique with this miner is that it uses three algorithms. When using this miner, you can use Cryptonight-V7, Equihash, or EtHash. All these algorithms play an integral part in mining Ethereum as the top coin. The mineable coins with this unit include Hush, Monero, Pirate, Zcash, ZenCash, and others. It was released in July 2018 and still enjoys a large following in the Crypto mining world.
The miner weighs 13,000g and comes with a high memory capacity of 8GB, unlike any other unit. It uses the Windows 10 operating system and the Ethernet interface. You will find the processor Intel ® Celeron ® CPU 3215U @1.70GHz, just like other PandaMiner products. This miner's size is 490*280*170mm, and the voltage is set at 12.4v and 12.6v. One should differentiate this miner from others in the category by the model B3 Pro (8GB).
There are a few mining pools that are associated with this miner. These pools include AntPool, Ethermine, NiceHash, Poolin, and SlushPool. You can easily get this miner from the manufacturer or selected stores and vendors.
As said earlier, this model has three algorithms, and each performs differently. The three algorithms found include Cryptonight-V7, Equihash, and EtHash. With each algorithm comes a different efficiency, hash rate, and power consumption. The power consumption of Cryptonight-V7 is 980W, while Equihash is 1025W. EtHash is the most used algorithm and offers a maximum power consumption of 1250W. The miner works on the 64-bit operating system, an x64-based processor.
With three different algorithms, the miner also comes with three different efficiency levels. With the Cryptonight-V7 algorithm, the efficiency found is 177.536j/Kh. Equihash comes with an efficiency level of 502.451j/Ksol. The efficiency of EtHash is 5.435j/Mh, which is higher than any other in the category. And this is why mining Ethereum is better with this miner and using this algorithm.
There is a different hash rate that comes with each algorithm. The hash rate of Cryptonight-V7 is 5.52Kh/s, and that of Equihash is 2.04Ksol/s. EtHash is the main algorithm and comes with a hash rate of 230Mh/s. It’s clear to see that the EtHash algorithm packs a punch when it comes to efficiency and power consumption. These three hash rates enable users to mine profitable coins under the ETH class.
With humidity and temperature settings in check, the miner will mine without any problems. And this is why minimum humidity is set at 10 percent while maximum humidity is 90 percent. As far as temperature goes, the minimum temperature is 0 degrees centigrade, with 40 degrees centigrade being the maximum.
The noise level will help miners determine where best to place the miner. It comes with 70 decibels of sound, making it a perfect miner for home use and industrial use. You can use this miner to mine Ethereum without having to worry about noise complaints. In an industrial setting, the miner will work perfectly with minimal noise heard from the outside.
Once you buy this miner, the payback period from trusted stores and vendors is 138 days. The profit ratio is estimated at 160 percent, and the annual return percentage is 264 percent. Daily income with this miner is projected at $5 while yearly income is $2,100.
The manufacturer offers a one year warranty from the date of shipping. Stores and vendors offer nearly the same in the number of days.
Period | /Day | /Month | /Year |
---|---|---|---|
Income | $0.34 | $10.20 | $124.10 |
Electricity | - $3.00 | - $90.00 | - $1,095.00 |
Profit | $-2.66 | $-79.80 | $-970.90 |
Algorythm | Hashrate | Consumption | Efficiency | Profitability |
---|---|---|---|---|
Ethash | 230MH/S±10% | 1250W±10 | 5.435j/Mh |
Disclaimer: The Above Profit Table is a carefully calculated estimate based on known real-time factors and Parameters. The actual values may or may not vary significantly from the values provided in the table above. The Above table is only meant to provide insights and afford Ideas to any cryptocurrency miner looking to purchase this particular Product for Mining Purposes.
Manufacturer | PandaMiner |
Model | B3 Pro (8G) |
Release | June 2018 |
Top Coin | EthereumPoW (ETHW) |
Size | 490 x 280 x 170mm |
Weight | 13000g |
Noise level | 70db |
Fan(s) | 6 |
Power | 1250W |
Voltage | 12.4-12.6V |
Interface | Ethernet |
Temperature | 0 - 40 °C |
Humidity | 10 - 90 % |
Hashcity multi-currency Mining Pool | Reviews & Features | PPS 1% | ||
2MINERS Mining Pool | Reviews & Features | 1.25% PPLNS,SOLO | ||
ETHASH Mining Pool | Reviews & Features | 0.5% PPLNS | ||
Sandpool | 1% PPLNS |
Store | Store Name | Price | Delivery | Additionnals | ROI |
---|
Mining Techn Group OU
Mining Techn Group OU is the sole owner of miningwatchdog.com
Mining Techn Group OU Registration number 16235478
Email: [email protected]
© 2019 - 2024 Miningwatchdog.com. Mining Techn Group Ou