Top Coin Profitability Chart
PandaMiner B3 Mute is another miner with two algorithms in place. The miner has a maximum hash rate of 230 Mh/s and 5.52 Kh/s. Panda Miner B3 Mute is using the algorithm Cryptonight-V7 and EtHash. It also has two power consumptions based on the algorithm used. When using the EtHash algorithm, the maximum power consumption is 1150W. Cryptonight-V7 brings a maximum power consumption of 980W. The miner was released in September 2018, and the top coin to mine is Ethereum.
About PandaMiner B3 Mute
Etherium and Monero are the leading top coins with this miner. The miner uses the Inter ® Celeron ® CPU 3215U @ 1.70 GHz. It also uses the Ethernet interface and weighs 14100g with 600*170*270mm. The miner comes with PSU and has a maximum voltage of 220v. You can use this miner using Windows 10 OS, and has a memory of 4GB. Other mineable coins include Musicoin, Pirl, Ubiq, and others. The memory comes with a power supply unit with a GPU amount AMD RX474*8 units.
You can get this miner from the manufacturer or selected stores. The system type on the OS is a 64-bit operating system, an x64-based processor.
Algorithm of the Mute B3 Panda Miner
Two very distinct algorithms produce different results in performance. Cryptonight-V7 is the first algorithm, and the second is EtHash. There are 8 chipboards available, and the chip’s name is RX474 with a memory of 4GB. PSU wires are included when purchasing this miner.
Efficiency of the PandaMiner B3 Mute
You also get two efficiency levels thanks to having two algorithms on the platform. The efficiency using Cryptonight-V7 is 177.536j/Kh. EtHash algorithm gives an efficiency of 5j/Mh, which is higher than the other miner. It would be best if you kept in mind that efficiency also affects the overall power consumption. The power consumption of this miner is based on the two algorithms. Cryptonight-V7 has a power consumption of 980W, while EtHash has a power consumption of 1150W.
Hash rate of the PandaMiner B3 Mute
The hash rate is also different as there are two algorithms in play. When using the Cryptonight-V7 algorithm, the hash rate is 5.52 Kh/s. While using the EtHash algorithm, the hash rate is 230 Mh/s. Using the EtHash algorithm yields better results in terms of performance and number of mineable coins.
Humidity and temperature measurements
With every miner, humidity and temperature settings play a vital role in ensuring the unit works effectively. And this is why the manufacturer has set minimum humidity as 5 percent and a maximum at 95 percent. Temperature levels also help to keep the miner going for longer. The minimum temperature is set at 5 degrees centigrade, while the maximum temperature is 40 degrees centigrade.
When it comes to cooling, the miner has 10 fans that help with cooling. These fans are low-noise, which is ideal for home mining activities.
Noise and sound volume
The B3 Panda Miner Mute comes with 60 decibels, enough to start a home mining operation. You can also use this miner for large scale mining without having to worry about complaints from neighbors. The sound level is environmentally friendly for everyone close to the unit.
The Profitability of the PandaMiner B3 Mute
When checking the profitability, we have to measure the payback period. With this miner, the payback period is around 160 days. The annual return percentage is around 227 percent, as the expected return per day is $5. In a year, expect to get over $2,000 after mining with this unit. Note that profitability will be affected by electricity rates in your area and market conditions.
Warranty of the miner
There’s a one-year warranty service from the manufacturer from the date of shipping. Other vendors might have fewer days of warranty services.
|Ethash||230 Mh/s||1150 W||5 j/Mh|
Disclaimer: The Above Profit Table is a carefully calculated estimate based on known real-time factors and Parameters. The actual values may or may not vary significantly from the values provided in the table above. The Above table is only meant to provide insights and afford Ideas to any cryptocurrency miner looking to purchase this particular Product for Mining Purposes.
PandaMiner Specs & Features
|Size||600 x 170 x 270 mm|
|Noise level||60 db|
|Temperature||5 - 40 °C|
|Humidity||5 - 95 %|